Loading... Please wait...


Hover over image to zoom

  • Image 1

 Product Description





 Find Similar Products by Category

 Product Reviews

  1. Good truck with floored stub axles & outdrives

    Posted by darren on 30th Jan 2015

    This is a pretty good truck apart from 2 dodgy parts. These are of course the diff out drives and stub axles. I managed 2 5min runs before they failed and a diff outdrive bent causing the dogbone to be thrown from the truck. This happened again after refitting it in place and quickly found the cause, not only are the outdrives and stub axles too thin but thee dogbone seemed to be a little bit too short causing too much movement/excess play.I quickly came up with a solution to add a couple of o-rings inside the stub axle to prevent the excess play. Everything had held together now with a brutal bashing with the exception of the stub axle showing more bending because of the thin metal used. Arrma need to come out with thicker metaled parts of these as well as perhaps a slightly longer dogbone roughly 84mm instead of the 80mm it currently ships with. Other than this huge oversight its a great truck but until arrma fix these 2 things I will constantly be replacing them I'm assuming. For that reason I would say wait for a revision on the product before buying

You Recently Viewed...


What's News


Copyright 2018 RC Masters. All Rights Reserved.
 Sitemap | Powered by BigCommerce - PSDCenter

Click the button below to add the ARRMA GRANITE AR102604 1:10 MEGA MONSTER TRUCK to your wish list.